AMI MUCNFL205-16RFW Flange Block Bearings

Basic Dynamic Radial Load Rating C:1470 N; B:5.00 mm; Sealed Speed Rating n3:30000 rpm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:43000 rpm; D:16.0000 mm; Oil Speed Rating Open/Shielded n2:50000 rpm; Basic Static Radial Load Rating Co:600 N; Fillet Radius ra:0.30 mm; d:4.000 mm;

Calculation factor f0:7.2; Fatigue load limit Pu:0.034 kN; D2 ≈:19.03 mm; Limiting speed:38000 r/min; B:7 mm; r1,2 min.:0.3 mm; Basic dynamic load rating C:1.99 kN; Da max.:20 mm; da max.:10.4 mm; Mass bearing:0.013 kg;

Da:339.999 mm; J1:114.3 mm; Housing:SAW 238; J min.:549.275 mm; H2:79.375 mm; ba:92.869 mm; P90°:173 kN; R2:42.069 mm; Bearing:23238 CC/W33; da:190 mm;

Housing:SNL 218 RU; Mass housing:11.8 kg; Bearing (basic designation):22315; P90°:340 kN; End cover:ASNH 218 R; P180°:275 kN; H2:35 mm; P0°:430 kN; Ca:65 mm; J6:317 mm;

D:80.0000 mm; Basic Static Radial Load Rating Co:28500 N; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:7000 rpm; d:35.000 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; Basic Dynamic Radial Load Rating C:39300 N; B:21.00 mm; Accessories:Two Shields & Snap-R;

Da max.:104 mm; Preload class C GC:1220 N; Static axial stiffness, preload class B:215 N/µm; db max.:80.8 mm; Ball diameter Dw:9.525 mm; r1,2 min.:1.1 mm; Preload class A GA:200 N; Db max.:105.8 mm; Preload class B GB:610 N; B:20 mm;

da min.:769 mm; d1:795 mm; B:22 mm; Basic dynamic load rating C:2000 kN; Reference speed:220 r/min; r1,2 min.:4 mm; ra max.:3 mm; d:670 mm; Fatigue load limit Pu:815 kN; D1:675 mm;

Accessories:Without Accessories; Basic Static Radial Load Rating Co:26500 N; Basic Dynamic Radial Load Rating C:33600 N; Grease Speed Rating Open/Shielded n1:7000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; d:40.000 mm; D:80.0000 mm; B:18.00 mm;

d:25.000 mm; D:52.0000 mm; B:22.20 mm; Grease Speed Rating n1:8000 rpm; Accessories:One Shield; Sealed Speed Rating n3:8000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:11000 rpm; Basic Dynamic Radial Load Rating C:22900 N; Basic Static Radial Load Rating Co:21200 N;

D1:62 mm; Pu:5.140 kN; H:17 mm; dynamic Cr:46.370 kN; Oil:4 200 min-1; d1:85 mm; Grease:3 200 min-1; d:60 mm; D:85 mm; rs (min):1 mm;

Mass bearing + sleeve:3.5 kg; db min.:66 mm; B4:13 mm; Basic dynamic load rating C:325 kN; D1 ≈:110 mm; da max.:77 mm; Ba min.:6 mm; Reference speed:4000 r/min; b:8.3 mm; B1:62 mm;

α:6 °; C1 max.:43 mm; Material constant KM:330; G:M 56x4; Basic dynamic load rating C:465 kN; r1 min.:1 mm; l1 min.:125 mm; B:49 mm; d2 max.:162 mm; dk:92 mm;

Ew:80 mm; Fatigue load limit Pu:10.6 kN; Limiting speed:6300 r/min; U:20 mm; Basic static load rating C0:85 kN; Basic dynamic load rating C:39.6 kN; Fw:72 mm; Reference speed:5600 r/min; Mass needle roller and cage assembly:0.098 kg;

d:160 mm; d3:190 mm; G:M 160x3; Mass adapter sleeve assembly:7.95 kg; Locking device:MBL 32; Hydraulic nut:HMV 32 E; d1:140 mm; Lock nut:KML 32; B1:147 mm; B4:28 mm;

d1:240 mm; B1:145 mm; G:Tr 260x4; B5:46 mm; Hydraulic nut:HMV 52E; d:260 mm; Locking device:MS 3052-48; Mass adapter sleeve assembly:13.5 kg; A:4.2 mm; G2:M 6;